Chamber volume:260 L,Range :Ambient+5~60 ℃,Number of shelves :3/8
Model: BCI-260
Order NO.: B6X11260 / B6X12260
1455
Specific parameters will be adjusted according to product upgrades, without notice.
The incubator is ideal for the experiments of the cultivation of animal cells, sperm/ovum, anaerobic cells, all sorts of microbe cells, hatching/germinating and special tissues.
Features
Fast Heat-Up, Fast-Recovery, Stable Control
7-inch Touchscreen
Displays CO2 concentration and temperature data in real time. USB flash drive allows for the storage of historical data information.
6 Sides Direct Heating System
Electric heating wire is covered on all sides of the chamber which makes stable uniformity and provides fast heat-up & temperature recovery.3 parts of heating section are controlled and calibrated individually by 3 temperature sensors.
Dry Wall and Air Jacket
Warm air from heating wire is preserved in space between the chamber and the insulation layer. It helps temperature recover faster and minimize heat loss.
Dry wall withinsulation requires no regular maintenance.
DUAL BEAM IR CO2 Sensor
Fast & precise detection for CO2 gas regardless of temperature and humidity.
Natural Humidification Using Water Tray
The heater on bottom side warms the water in tray and it makes humidification. The circulation fan delivers the moisture formed from the water in the entire chamber
Over Heating Limit
Heating is automatically cut by safety device when temperature control fails or there is excessive heating over set point.
Perforated Shelves
Perforated shelves are good for natural air flows and are made of stainless steel which is resistant to rust and contamination.
No Condensation
Heating by front door heater & frame heater prevents condensation in the chamber and on the glass door.
Microprocessor PID Control
Intelligence Control for CO2 density, Temperature, Alarm, Automatic,Decontamination (Optional).
HEPA filtration of the chamber
Technical Parameters
Temperature Range: Ambient +5 °C to 60 °C
Temperature Resolution: 0.1 °C
Dry Heat Sterilization: Up to 125 °C
Control Method: Digital PID
CO₂ Range: 0% to 20%
CO₂ Accuracy: ±0.1% (at 5% / 37 °C)
CO₂ Resolution: 0.1%
CO₂ Sensor: Dual-beam infrared CO₂ sensor
Display: TFT touch screen
Control Panel: Touch screen operation
Jacket Type: Air jacket (six-sideds heat)
Chamber Material: Stainless steel (304)
Specifications
|
Model |
BCI-260 |
|
|
Order No. |
Standard |
B6X11260 |
|
Sterilization |
B6X12260 |
|
|
Chamber volume |
260L |
|
|
Temperature Stability [℃ ] |
±0.1℃ (37℃) |
|
|
Temp. Uniformity |
±0.4℃ (37℃ / RT.20℃ ) |
|
|
Heating Capacity [W] |
610 |
|
|
CO2 Inlet pressure range |
0.6~0.7bar |
|
|
Number of shelves |
3/8 |
|
|
Chamber dimension [WxDxH] |
590x530x900mm |
|
|
Overall dimension [WxDxH] |
630x680x1125mm |
|
|
Weight [kg] |
115 |
|
Copyright © 2026 Biostream All rights reserved.